2007 Toyota Tundra
Mileage
217,340
Service Date
11/24/2021
Services Performed
- CHECK VEHICLE COMPLETELY & REPORT FINDINGS ON ATTACHED SHEET.
- PERFORM OIL CHANGE, INSTALL NEW OIL FILTER, DRAIN PLUG GASKET AND FILL OIL TO SPEC. CHECK AND TOP OFF ALL FLUIDS. CHECK AND ADJUST TIRE PRESSURE TO SPEC PERFORM PREVENTATIVE MAINTENANCE INSPECTION RESET MAINTENANCE LIGHT IF ITS ON OR OFF INSTALL OIL CHANGE STICKER TO WINDSHIELD
- ROTATE TIRES TO CUSTOMER SPECIFICATIONS AND CHECK & ADJUST AIR PRESSURE
- CHECK FOR NOISE IN FRONT WHEEL AREA, POSSIBLE BAD WHEEL BEARING
- REMOVE & REPLACE DEFECTIVE BATTERY & RECHECK CHG SYSTEM
- SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace – Both – [DOES NOT include disassemble or alignment.]
- Deglaze front brake pad linings and machine front brake disc rotors on vehicle with new state of the art on car brake lathe, THAT WILL PERFORM 0 TOLERANCE HIGH PRECISION CUTTING for much better accuracy. Clean and repack wheel bearings if equipped. Clean and lubricate brake calipers and slide mechanisms. Check and fill brake fluid. Bleed air from system. Road test vehicle. PLEASE GIVE BRAKES ABOUT 50 TO 100 MILES TO BREAK IN……..THANKS DAVE
- Deglaze rear brake pad linings and machine rear brake disc rotors on vehicle with new state of the art on car brake lathe, THAT WILL PERFORM 0 TOLERANCE HIGH PRECISION CUTTING for much better accuracy, if applicable. Clean and repack wheel bearings if equipped. Clean and lubricate brake calipers and slide mechanisms. Check and fill brake fluid. Bleed air from system. Road test vehicle. PLEASE GIVE BRAKES ABOUT 50 TO 100 MILES TO BREAK IN……..THANKS DAVE
CHRIS P. gave our service a 5 star review on 12/2/2021
